Transform Your Ride in Just Hours, Right Here in Brampton

✨ ALL-IN-ONE POLISH & WAX

Our All-In-One Polish & Wax is a single-stage machine-polishing service designed to clean, polish and protect the paint in one efficient process.

Using 3D SPEED All-In-One Polish & Wax, this service combines light paint correction, gloss enhancement and protective wax/sealant properties into a single polishing step. It is ideal for vehicles that need more than a standard exterior detail but do not require the time, cost or aggressive defect removal of a dedicated Paint Correction.

Using a Dual-Action (DA) polisher and carefully selected polishing pads, 3D SPEED works to reduce light swirl marks, wash marring, oxidation and minor imperfections while restoring gloss, clarity, colour depth and slickness to the finish.

Unlike a dedicated correction service, the goal is not maximum defect removal. The focus is achieving a cleaner, glossier and noticeably improved finish while simultaneously leaving protection behind.

⚠️ ALL-IN-ONE POLISH & WAX PROCESS

Before machine polishing begins, the vehicle receives a thorough exterior preparation wash and paint decontamination to remove dirt, road film and bonded contamination.

The paint is inspected and a test spot is performed to determine the appropriate pad, machine speed and polishing technique for the vehicle's specific paint system.

Using 3D SPEED with a Dual-Action polisher, each painted panel is polished in a controlled single-stage process.

The polishing abrasives help refine lighter imperfections and improve paint clarity, while the protective components contained within 3D SPEED leave behind a smooth, glossy and protected finish.

Different pad combinations may be selected depending on paint hardness and condition. Softer paint systems receive a more conservative approach to minimize haze and micro-marring.

The result is a significant visual improvement without the additional cutting and refinement stages associated with dedicated Paint Correction.

🔎 EXPECTED RESULTS

Our All-In-One Polish & Wax is designed primarily for overall appearance improvement with light defect reduction and protection in a single service.

Depending on paint hardness, condition and defect severity, approximately 20–40% of lighter visible defects may be reduced or removed.

This is an estimated range and not a guaranteed defect-removal percentage. Moderate and deeper defects are expected to remain because aggressively chasing defects is not the purpose of an All-In-One service.

🕶 DESIGNED TO IMPROVE:

• Light swirl marks

• Light wash marring

• Minor paint haze

• Very light scratches

• Mild oxidation

• Dull or tired-looking paint

• Paint clarity

• Colour depth and richness

• Overall gloss and reflections

• Paint smoothness and slickness

• Overall appearance

👓 NOT DESIGNED TO REMOVE:

• Moderate or heavy swirl marks

• Deeper scratches

• Heavy water-spot etching

• Severe oxidation

• Sanding marks

• Heavy compounding defects

• Significant polishing damage

• Deep clear-coat defects

• Defects requiring dedicated correction stages

⏲️ ESTIMATED DURATION

Approximately 3–5 hours

Completion time varies depending on vehicle size, paint condition, contamination, paint hardness and body complexity.

🛠️ TOOLS & PRODUCTS

• 3D SPEED All-In-One Polish & Wax

• 15mm Dual-Action (DA) Polisher

• Lake Country foam polishing pads

• Finishing or light polishing pads selected according to paint condition

• FLEX PXE 80 or similar compact polisher for tight areas

• Professional paint inspection lighting

• Paint-depth gauge when required

• Premium soft microfiber towels

• Masking tape for trim and sensitive areas

• Compressed air / pad blower

• Multiple clean polishing pads to maintain consistent performance

🧼 WHAT'S INCLUDED

• Exterior preparation wash

• Chemical paint decontamination

• Mechanical decontamination as required

• Rims cleaned & tires dressed

• Paint inspection

• Paint-depth measurements when required

• Test spot

• Single-stage machine polishing using 3D SPEED

• Light polishing of applicable tight areas

• Final paint inspection

• Removal of polishing residue

• Integrated paint protection from 3D SPEED

🛡️ INCLUDED PROTECTION

Unlike our dedicated Paint Enhancement and Paint Correction services, 3D SPEED contains protective ingredients that leave protection behind as the vehicle is polished.

This creates a slick, glossy and protected finish immediately after polishing without requiring a separate traditional wax application.

Because durability depends heavily on vehicle use, washing methods, weather and environmental exposure, this service should be considered short-term paint protection rather than a long-term coating solution.

⚠️ IMPORTANT — CERAMIC COATING

Our 3D SPEED All-In-One service is not used as the final polishing process before applying a ceramic coating, because it intentionally leaves wax/protective ingredients behind on the paint.

Vehicles receiving a ceramic coating will instead be polished using an appropriate coating-compatible polishing system, followed by a proper panel-preparation process to create a clean surface for coating installation.

💰 STARTING PRICE

Cars: $249+

SUVs / Trucks: $349+

Final pricing is determined by vehicle size, paint condition, contamination, body complexity and the amount of preparation required.

✅ BEST FOR:

Vehicles with light swirl marks, mild oxidation, wash marring or dull paint where the customer wants a noticeable improvement in appearance without investing in a dedicated Paint Correction.

It's also an excellent option for daily drivers, seasonal details, resale preparation and regularly maintained vehicles that would benefit from polishing and protection at the same time.

If your goal is to clean up lighter imperfections, restore gloss and protect the paint in one efficient service, our All-In-One Polish & Wax with 3D SPEED is an excellent choice.

POLISH • ENHANCE • PROTECT — ALL IN ONE.